Citizen Systems PPU-231II - Manual (Page 4)

— 2 —
In the Mode column: S = STANDARD MODE, P = PAGE MODE
* shows the command affected by GS P.
31 ESC V
Specifying/Canceling 90°-right-turned
S <1B>H<56>H 41
characters
<1B>H<57>H
32 ESC W Defining the print area in PAGE MODE P * 42
33 ESC \ Specifying the relative position S.P.
*
<1B>H<5C>H 44
34 ESC a Aligning the characters S.P. <1B>H<61>H 45
35 ESC c3
Selecting the Paper Sensor valid for
S.P.
<1B>H<63>H<33>H
46
paper end signal output
36 ESC c4
Selecting the Paper Near-end Sensor valid
S.P.
<1B>H<63>H<34>H
47
for print stop
37 ESC c5 Enabling/Disabling the panel switches S.P.
<1B>H<63>H<35>H
48
38 ESC d Printing and feeding the paper by “n” lines S.P. <1B>H<64>H 49
39 ESC n Setting a remaining amount of printout S.P. <1B>H<6E>H 50
40 ESC t Selecting the character code table S.P. <1B>H<74>H 51
41 ESC { Specifying/Canceling the inverted characters S <1B>H<7B>H 52
42 GS ! Specifying the character size S.P. <1D>H<21>H 53
43 GS $
Specifying the absolute vertical position
P *
<1D>H<24>H
55
of characters in PAGE MODE
44 GS * Defining the download bit image S.P.
<1D>H<2A>H
56
[]n1
×
n2
×
8
45 GS ( A Execution of test printing S
<1D>H<28>H<41>H
58
46 GS / Printing the downloaded bit image S.P. <1D>H<2F>H 59
47 GS : Starting/Ending macro definition S.P. <1D>H<3A>H 60
48 GS A
Correcting the position of black mark
S.P.
<1D>H<41>H
61
top position
49 GS B
Specifying/Canceling the black/white
S.P. <1D>H<42>H 62
inverted printing
50 GS H
Selecting of printing position of HRI
S.P. <1D>H<48>H 63
characters
51 GS I Sending the printer ID S.P. <1D>H<49>H 65
52 GS L Setting the left margin S *
<1D>H<4C>H
66
53 GS P Specifying the basic calculation pitch S.P.
<1D>H<50>H
68
54 GS R0 Collecting receipts S.P.
<1D>H<53>H<30>
HH
69
55 GS R1 Setting receipt collection timer S.P.
<1D>H<53>H<31>
H
70
56 GS S Detecting a black mark S.P. <1D>H<53>H 71
(1)<1D>H<56>H
57 GS V Cutting the paper S.P. * (2)<1D>H<56>H 72
No. Command Function Mode Code Page