Gs s – Citizen Systems PPU-231II User Manual

Page 73

— 71 —

GS S

[Function]

Detecting a black mark

[Code]

<1D>H<53>H

[Outline]

• This command is valid only when a black mark is set in the

paper selection with DIP switch.

• Entering this command allows detection of a black mark.

• When a black mark is detected, the print paper is cut and

ejected.

• Also at the time of printer power on, a black mark is detected

and the print paper is cut and ejected. (Settable with DIP switch)

• If the 18-in. black mark cannot be detected, a mark detection

error occurs, causing BUSY and FAULT to be generated while
cutting and ejecting the print paper.

[Caution]

This command is ignored when normal thermal paper is set in
the paper selection with DIP switch.