Canon A80 - Manual (Page 153)

149
Pr
int Sett
ings
, T
ra
nsf
err
ing
3
Select images for transferring.
Single Images
• Select an image using the left or
right button and mark or remove
marks from images using the up
or down button.
• You can use the same procedure
when you switch to index
playback (a set of three images)
by pressing the zoom lever
toward
.
All the Images on a CF Card
• Switch to index playback (a set of
three images) by pressing the
zoom lever toward
.
• Press the button, select
[Mark all] using the up or down
button and press the
button
again. (If you select [Clear all]
instead of [Mark all], you can
remove marks from all the
images.)
• You can mark or remove a mark from each image after
marking or removing marks from all the images.
4
Press the button.
The selection mode will turn off and the Transfer Order
menu will reappear.
• Images are transferred in order from oldest to newest by
the shooting date.
• A maximum of 998 images can be marked per CF card.