Home Styles 5588-94 - Manual (Page 2)

IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Use a soft cloth between these parts and the fl oor.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
B
I
E
P
K
STEP 1
Insert Cam Lock Screws into the pre-drilled holes of Bottom (B), Side
Panel (C), (E), Front Rail (I), (J) and Back Rail (L). (see Figure 1)
Cam Lock Screw
Flat Washer
Cam Lock Screw
STEP 2
Attach Wood Support (P) to the Back Rail (K)
with Flat Washers, Spring Washers and Head
Cap Bolts.
Insert Cam Lock Screw into the pre-drilled
holes of Back Rail (K).
L
C
Figure 1
Assembly Instruction 2 / 8
K
Head Cap Bolt
Spring Washer
B
I
Cam Loc
J