Home Styles 5411-61 - Manual (Page 3)

Assembly Instructions 3
Figure 3
Figure 4
STEP 3
Attach unit from Step 1 to
Top (A) with Head Cap Bolts,
Spring Washers and
Flat Washers.
STEP 4
Turn the unit to its’ upright position.
Attach Drawer Stops with
Wood Screws into the pre-drilled holes
inside the opening of the unit.
(see Figure 2)
Remove the Pull Handles that are
installed on the inside of the drawers
and re-install them on the outside of
the drawer. (see Figure 3)
Slide the drawers into position.
To the level the unit, adjust
the adjustable levelers on the
bottom of the legs. (See fi gure 4)
/3
Head Cap Bolt
Spring Washer
Flat Washer
Figure 2
B
A
Wood Screw
Drawer Stop