Bradford White HE-4-50S6FSX - Manual (Page 32)

Page 32
Inner Door Removal Procedure
Step 1. Move the gas control power switch to the “OFF”
position.
Step 2. Unplug the water heater from the wall outlet.
Step 3. Remove the outer door.
Step 4. Remove (4) 1/4” hex drive screws from the right
side inner door.
Step 5. Remove (2) 1/4” drive screws from the left side
inner door.
Step 6. Remove the connectors attached to the resettable
thermal switch on the right side inner door.
Inner Door Removal
Connectors attached to reset-
table thermal switch
Gas control power
switch
Blower (water heater)
power cord
Outer door
(4) 1/4” hex drive
screws Right side
inner door
Left side inner door
1/4” hex drive
screws
32