AVF PM-D - Manual

Mounting Spine
(1)PM-S
Camera Tongue
(1) PM-S
M6 x 25
(4) PM-S
(+4) PM-D
M8 x 20
(10) PM-S
(+12) PM-D M8 x 12
(10) PM-S
Mounting Bracket
(1)PM-S
(+1)PM-D
Mounting Base
(1)PM-S
Base Extension
(1) PM-S
TV Bracket
(2)PM-S
(+2)PM-D
M8 x 40
(4) PM-S
(+4) PM-D
M5 x 25
(6) PM-S
(+6) PM-D
Multi Washer
(4) PM-S
(+4) PM-D
M5-M8 Washers
(14) PM-S
(+14) PM-D Spacer
(4) PM-S
(+4) PM-D
Camera Mount Neck
(1) PM-S
Hex Keys
6,5,4mm
(3) PM-S 5/16 Nut
(6) PM-S
13mm
9/16inch
Wrench or Socket (2) Tape
Measure
Spring Washer
(12) PM-S
(+4) PM-D M8 Lock Nut
(4) PM-S
(+8) PM-D
Assembly and mounting Instructions
(not supplied)
1.9
TV's sized 32-50+" and weighing no more than 160lbs each.
190 Don Hillock Drive, Aurora , Ontario L4G OG9 www.video-furn.com
Toll Free: 1-877-834-3876 Fax: 1-905-751-1488 Local:905-751-1459
Some larger TV's will fit, Download TV manufacturers specs online,
of 8
Read these intructions start to finish before beginning installation.
Not all hardware supplied will be used depending on the manufacturer of your display/s.
Supplied Hardware:
Supplied Parts:
Contact a qualified contractor or contact VFI at 1-877-834-3876.
(+1)PM-D
(1) in PM-S Bag , (+1) in PM-D Bag
Confirm all parts are included before you begin assembly.
Dual Bracket Support
Tools required:
These products are designed for tabletop mounting of a single or dual plasma/lcd
PM-S and PM-D
VIDEO FURNITURE INTERNATIONAL
If you cannot understand these instructions or are concerned about safety of the installation
max hole location is 700mm wide x 440mm high
Page 1
Note: 2 persons are required to attach plasma/lcd TV's to this mount.
Thank you for purchasing VFI's universal display mounting system.
Note: You will need the PM-S box in addition
to the PM-D box to assemble a PM-D.
(+)Items only come in the PM-D box.
M6 x 40
(4) PM-S
(+4) PM-D
5/16 Carriage Bolt
(6)PM-S
Large Washer
(6) PM-S