B&C Technologies PF Series - Manual (Page 24)

Chapter 7
Machine Service
7.1 Daily
• Errors that appears on the display of the operation panel must be corrected immediately.
• Items stuck or jammed inside of the machinemust be removed first. Any item that interferes
with the operation of the photocells must be removed.
• If the machine has not operated for a long duration (vacation or other extended idle time),
run the machine 5 minutes using the endurance programm. This simulation programm en-
sures that the machine runs correctly.
7.2 Weekly
• Clean the photocells (if necessary often)
• Cleaning of the machine with vacuum cleaner - no harsh chemicals, sprays, or wet cleaners
of any kind!
• Defective belts must replaced
• Confirm the oil level and fill if needed
• Check battery charge state (on the panel in the settings menu under Machine state)
7.3 Monthly
• Check the tension of the driving elements.
20