Casio DT-930 - Manual (Page 59)

E-59
1 AC adaptor jack For connection of the AC adaptor to supply power
2 Nose Guide Remove this guide when you are using the down-facing reader
port model.
3 Terminal detection switch Detects whether or not the Handheld Terminal is mounted correctly
on the Cradle-type Battery Charger
4 Spare battery pack charge Indicates the charge status of a spare battery pack installed in the
indicator ("CHG 2") spare battery compartment.
Off:
Not charging, or a battery pack problem
Lit Red: Charging (charging standing by when the battery in the
Handheld Terminal is charging)
Lit Green: Charging complete
5 Battery pack charge indicator Indicates the charge status of the lithium-ion battery pack in the
("CHG 1") Handheld Terminal.
Off:
Not charging (e.g. lithium-ion battery not loaded in
Handheld Terminal) or a battery pack problem
Lit Red: Charging
Lit Green: Charging complete
6 Power indicator Indicates whether power is ON or OFF, and if the Handheld
("READY/POWER") Terminal is mounted.
Off:
Power OFF
Lit Red: Power ON, Handheld Terminal not mounted
Lit Green: Power ON, Handheld Terminal mounted
7 Desktop guides (L, R) Holds down the Handheld Terminal on the Cradle-type Battery
Charger that is placed on a flat surface in desktop configuration.
8 Charge/Power supply terminals Supplies power to the Handheld Terminal mounted on the Cradle-
type Battery Charger.
9 Battery pack charge terminals Charges the spare battery pack separately.
10 Power switch Turns power ON and OFF.
11 Base Reverses the position of the base when wall-mounting the Cradle-
type Battery Charger.
12 Wall mounting holes Use these holes to attach the Cradle-type Battery Charger to hook
on a wall.