Casio DT-930 - Manual (Page 40)

E-40
4
Hang the wall mount unit from the screw
through the hole on its top.
5
Insert the screw provided into the top part of
the lower hole of the wall mount unit.
6
Tighten both the upper and lower screws.
Removing the Wall Mount Unit
1
Loosen both the upper and lower screws.
2
Slide the wall mount unit up to remove it.
Important! • Check the tightness of the screws after mounting the Bridge Basic
Cradle to the wall.
POWER LINE
POWER LINE
Setting up the Bridge Basic Cradle