Casio DT-930 - Manual (Page 37)

E-37
Setting up the Bridge Basic Cradle
1
Make sure that the Bridge Basic Cradle’s
power switch is turned off and then plug the
optional AC adaptor (AD-S15050AE) into the
AC adaptor jack on the back of the Bridge
Basic Cradle.
2
Connect the power cord to the AC adaptor
before connecting the power cord to the
electrical outlet.
3
Connect the USB cable (DT-380USB) to the
USB port on the back of the Bridge Basic
Cradle and then connect it to the personal
computer.
4
Line up the infrared interface on the bottom of
the DT-930 and the infrared interface on the
Bridge Basic Cradle to mount the DT-930.
5
Turn on the power switch.
The power indicator LED on the front of the
Bridge Basic Cradle lights green if the DT-930
is correctly mounted.