Canon FAX-L2000IP EN - Manual (Page 50)

Setting a Document 2-4
Docu
men
ts a
nd Prin
t Me
dia
2
4
Insert the document fully into the feeder until the leading edges
of the document stops.
The following messages appear on the LCD display:
NOTE
•
If the machine already displays before you set your document,
a small-sized document, such as a STMT document, may have remained in the
automatic document feeder from a previous fax or copy job. In such a case, remove the
small-sized document from the automatic document feeder, and set your document.
(See Chapter 7, “Troubleshooting”, in the Reference Guide.)
Adjusting the Scan Settings
Canon’s original UHQ (Ultra High Quality) imaging technology enables you to send documents
or make copies that are very close to the quality of the original document. For best results,
adjust the scan settings for special documents before sending or copying.
NOTE
•
The light indicators on the operation panel tell you the current settings.
•
After the document is copied, the settings return to the previously set settings before copying.
1
Press the appropriate key underneath the indicators repeatedly
to illuminate the desired scan/copy setting.
MEM IN USE
4%
DOCUMENT READY
Resolution
Ultra Fine
Super Fine
Fine
Standard
Document Type
Text
Text/Photo
Contrast
Darker
Standard
Lighter