Canon FAX-L2000IP EN - Manual (Page 43)

Using the Menus and Operation Panel Keys
1
Be
fore Yo
u Start
U
s
ing
Thi
s
Mach
ine
1-27
3
Enter the next letter, if necessary.
If the next letter you want to enter is under the same key you just pressed,
press [
] to move the cursor to the right one space. Then, press the key
repeatedly until the letter you want appears.
If the next letter you want to enter is under a different key, just press that key to
move the cursor to the right, and enter the first letter of that group.
For example, if you want to enter the word :
Press b until you see an upper case ➞ press ➞ press b until you see
a lower case . To enter the rest of the word, press f until you see a lower
case ➞ press [ ] to move the cursor to the right ➞ press f until an
appears ➞ press [ ] to move the cursor to the right ➞ press f again until an
appears.
NOTE
• When you are in the upper or lower case letter Entry mode, you can also enter symbols.
Press (#) repeatedly until you see the desired symbol.
• To enter a space, press [Space].
4
To complete entering the name for registration, press [OK].
Correcting a Mistake
1
Press [ ] or [ ] to move the cursor to the left or right to position
it under the incorrect letter ➞ open all three one-touch speed
dialing panels ➞ press [Delete] ➞ enter the correct letter.
NOTE
• Press (Clear) to delete the entire entry ➞ start again.
▲
▲
▲
OK
:a
DATA ENTRY OK
OK
Delete
▲
▲
C