Canon FAX-L2000IP EN - Manual (Page 45)

Setting the Display Language and Country 1-29
1
Be
fore Yo
u Start
U
s
ing
Thi
s
Mach
ine
Setting the Display Language and
Country
When you connect the power cord to an AC outlet for the first time, you need to select the
language for the LCD display. For some countries, you also need to select the country where
you are using the FAX-L2000/2000IP. The FAX-L2000/2000IP automatically switches the
selectable settings and the default settings in the menus to suit the selected country.
Follow these steps to set the display language and country.
After connecting the power cord, the display changes from to the LANGUAGE> menu.
NOTE
•
The country selection feature is available for certain countries only.
1
Press [ ▼ ] or [ ▲ ] to select the preferred language for the LCD
display ➞ press [OK].
If does not appear after is
displayed, the setting is completed. The FAX-L2000/2000IP enters the
Standby mode.
If appears, go to step 2.
2
Press [ ▼ ] or [ ▲ ] to select the country where you are using the
FAX-L2000/2000IP ➞ press [OK].
Once you have selected the language and country, these setting menus will
not appear next time you connect the power cord.
OK
DISPLAY LANGUAGE
<
ENGLISH >
➞
COUNTRY SELECT
UK
OK
COUNTRY SELECT
UK