Allen Sports XLT2 - Manual (Page 7)

INSTRUCTIONAL
OWNER’S MANUAL
7
FIGURE 5a FIGURE 5b FIGURE 5c
HITCH
Attaching trailer to bicycle
Removal of trailer
NOTE: This trailer is not designed to be used with electric bikes or motorcycles, or any motorcycle or any
motorized vehicle.
STEP 1:
STEP 1:
STEP 3:
STEP 3:
STEP 2:
STEP 2:
STEP 4:
STEP 4:
Loosen left side rear axle to allow the hitch to attach to frame.
Remove Safety strap by releasing D-ring
Tighten axle nut securely, testing to see the hitch is unable to pull loose (Fig 5b).
Pull trailer arm away from black hitch
Position hitch over left rear axle of bicycle frame (Fig5a).
Remove QR snap pin from hitch connection
Loop Safety Strap around frame and secure to D-ring on hitch arm (Fig 5c).
Black Hitch attached to axle can remain with the bicycle for easy reattachment.
WARNING!: Safety strap must attach to the bike frame when using this product in trailer mode. QR snap pin must be in
place and locked before riding. Added weight of it’s passengers or cargo, or both will affect the handling
characteristics of the bicycle to which it is attached.
Your iGO trailer is designed to attach easily to just about any full-size bicycle. The hitch fitting must be attached to
the rear axle of the bike. Do not attach to any cycle where it cannot attach to the axle. It is recommended that the
bicycle(s) to which the trailer will be attached undergo a safety check by a qualified bicycle mechanic before
attaching the trailer to it.