Instructional owner’s manual, Jogger assembly – Allen Sports XLT2 User Manual

Page 12

Text mode
Original mode

INSTRUCTIONAL

OWNER’S MANUAL

JOGGER ASSEMBLY

STEP 1:

STEP 2:

STEP 3:

To install the jogger kit, first remove the hitch arm by releasing opening and releasing the QR pin,
then press the spring pin and pull out the arm. Also remove the pin on the opposite side clamp.

Next, take one arm, ( Right and left arms are not the same, note the screw thread faces up),
insert into the aluminum bracket, align with the fixing hole and insert and lock the spring pin.

Tighten the fixing screw into the threaded nut in the bottom of the front frame tube. Perform
same action for both fork tubes.

NOTE:

Make sure spring pin is locked. If not locked, the pin may fall out, releasing the fork. This may cause injury

to you or your child.