Instructional owner’s manual, Attaching trailer to bicycle removal of trailer – Allen Sports XLT-X2 User Manual
Page 8
INSTRUCTIONAL
OWNER’S MANUAL
8
FIGURE 11
FIGURE 12
FIGURE 13
ATTACHING TRAILER TO BICYCLE
REMOVAL OF TRAILER
NOTE:
This trailer is not designed to be used with electric bikes or motorcycles.
STEP 1:
STEP 1:
STEP 3:
STEP 3:
STEP 2:
STEP 2:
STEP 4:
STEP 4:
Loosen left side rear axle to allow the hitch to attach to frame.
Remove Safety strap by releasing D-ring
Tighten axle nut securely, testing to see the hitch is unable to pull loose (Fig. 12).
Pull trailer arm away from black hitch
Position hitch over left rear axle of bicycle frame (Fig. 11).
Remove QR snap pin from hitch connection
Loop Safety Strap around frame and secure to D-ring on hitch arm (Fig. 13).
Black Hitch attached to axle can remain with the bicycle for easy reattachment.
WARNING!:
Safety strap must attach to the bike frame when using this product in trailer mode. QR snap pin must be in
place and locked before riding. Added weight of it’s passengers or cargo, or both will affect the handling
characteristics of the bicycle to which it is attached.
Your Allen Strailer is designed to attach easily to just about any full-size bicycle. The hitch fitting must be attached to the rear axle of
the bike. Do not attach to any cycle where it cannot attach to the axle. It is recommended that the bicycle(s) to which the trailer will be
attached undergo a safety check by a qualified bicycle mechanic before attaching the trailer to it.