Dell PowerEdge 2600 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Contents
Rack-to-Tower Kit Contents........................................................ 1-2
Before You Begin........................................................................... 1-4
Removing the Rack Doors.............................................................. 1-4
Recommended Tools and Supplies................................................ 1-4
Conversion Tasks............................................................................ 1-4
Removing the Rack Doors........................................................... 1-5
Removing the Cable-Management Arm....................................1-5
Removing the System From the Rack...................................... 1-7
Removing the Bezel, Cover, and Front Panel........................ 1-9
Installing the Tower Left-Side Trim Panel............................ 1-11
Installing the Tower Front Panel............................................. 1-11
Installing the Cover, Feet, and Bezel..................................... 1-12
Removing the Slide Assemblies.............................................. 1-12
Replacing the Rack Doors......................................................... 1-13
F i g u r e s
Figure 1-1.
Rack-to-Tower Kit Contents........................... ___ 1-3
Figure 1-2.
Removing the Cable-Management Arm......... ___ 1-6
Figure 1-3.
Removing the System From the
Slide Assemblies............................................. ___ 1-8
Figure 1-4.
Removing or Replacing the Front Bezel . . . .___ 1-9
Contents
I 3