Installing the tower left-side trim panel, Installing the tower front panel, Installing the tower left-side trim panel -11 – Dell PowerEdge 2600 User Manual
Page 15: Installing the tower front panel -11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installing the Tower Left-Side Trim Panel
^ NOTE:
It may be more convenient to set the chassis upright in the tower position
whiie instaiiing the ieft-side trim panei.
Position the tower left-side trim panel into position with the baek end extending
12.7 millimeters (0.5-ineh) beyond the baek of the ehassis, and then slide the side trim
panel toward the front panel until it stops.
^ NOTE:
You may need to tiit the chassis siightiy to provide ciearance for instaiiing the
ieft-side trim panei.
Cheek to see that the trim panel is flush with the front of the system ehassis.
Installing the Tower Front Panel
1
Install the tower front panel on the front of the ehassis (see Figure 1-6), and seeure it
with 16 T-10 Torx serews.
2
Reinstall the hard drives into their proper slots.
Figure 1-6. Installing the Tower Front Panel
R a c k - t o - T o w e r C o n v e r s i o n G u i d e |
1-11