CatEye PERSONAL CYCLOCOMPUTER OS 1.0 - Manual (Page 6)

6 OS 1.0
3. Restart/Format/Setup
Restart operation (1.When erratic data appears; 2.After replacing battery)
After replacing the battery, the electric current can be unstable which might
effect the operation of the OS1.0. To avoid this you must press the RESTART
button after replacing the battery.
Note: After restart operation, Elapsed Time, Trip Distance, Average Speed,
Maximum Speed and Clock Time is erased. Set Clock Time again.
Format operation (1.Before first use; 2.When erasing all the stored data)
Caution: Take note that all the data is erased by this operation.
If you want to stop format operation, select "NO" and
the unit returns to measuring screen.
This operation erases all the data and settings.
1. Hold down both MODE/SELECT buttons simultaneously, press and
release RESTART button. The message "FORMAT?" appears.
2. Select "YES" and press ENTER/START/STOP button.
Once format operation is done, the unit need to be set up from the
first step.
Setup
In addition to Quick Setup that is writ-
ten in the Setup guide, there is Custom
Setup (see the next page). In the Cus-
tom Setup, you can select only your fa-
vorite functions that you want to use,
and you can also choose your preferred
font size and input your personal data.
Note: By pressing the two SELECT/
MODE buttons simultaneously
you can go back to the next pre-
vious screen.
Setup process
Goes to previous screen
Speed scale setting
Tire size setting
Date setting
Time scale setting
Clock time setting
Custom setup entrance
Setup finished
YES
NO
Function customizing
Font size setting
Personal data input
Setup finished
QUICK SETUP CUSTOM SETUP