Workrite Sierra HX Electric Workcenters - Manual (Page 3)

Workrite Ergonomics | 800.959.9675 www.workriteergo.com 3
Sierra HX Electric Workcenters - Special Settings
Set Custom Height Limits
You can set custom limits for both the upper and lower height range.
You can set just an upper or lower custom height limit - it is not necessary to set both an upper
and a lower height limit. If both are set, the lower height limit must be lower than the upper height
limit.
To set a new lower limit:
Move to the desired lower limit.
Press the following buttons at the same
time for about 2 seconds:
The “SET” Button and the Down Arrow
The display shows “Lo” and the value has
been set.
To set a new upper limit:
Move to the desired upper limit.
Press the following buttons at the same
time for about 2 seconds:
The “SET” Button and the Up Arrow
The display shows “Hi” and the value has
been set.
To delete custom limits:
Press the following buttons at the same
time for about 4 seconds:
The “SET” Button and the Up and Down
Arrows
4 seconds the display will show “CLr” to
indicate that reset has been made.
a
b
c
or +
2 3 1
5
10
15
20
25 30 35
40
45
50
55 60
a
5
or +
2 3 1
5
10
15
20
25 30 35
40
45
50
55 60
b
or +
2 3 1
5
10
15
20
25 30 35
40
45
50
55 60
c
To press the “SET” button, use a ballpoint
pen. Do NOT use a paperclip - it may
damage the electronics.
To press the “SET” button, use a ballpoint
pen. Do NOT use a paperclip - it may
damage the electronics.
To press the “SET” button, use a ballpoint
pen. Do NOT use a paperclip - it may
damage the electronics.