Workrite Fundamentals 02 - Manual

Workrite Ergonomics | 800.959.9675 www.workriteergo.com 1 of 1
Fundamentals AKP02 Keyboard Platform System – Instructions #1500218 - Rev A
A
Pinnacle 2 Value
Keyboard Arm
Qty: 1
B
Mouse-Over
Keyboard Platform
Qty: 1
C
#10 × ½" Sheet
Metal Screws
Qty: 4
D
#10–24 × ½” Flat
Head Screw
Qty: 1
Assembly Instructions: Fundamentals AKP 02
Parts
Mount the Keyboard Arm to
the Worksurface
Use the instructions that came
with the Keyboard Arm to mount
arm under worksurface.
Attach Keyboard Platform to
Keyboard Arm
Attach Keyboard Platform (B)
to Arm (A) using the four Sheet
Metal Screws (C) provided.
Attach Mouse Platform to
Keyboard Platform
Slide the Mouse Platform on either
the right or left side and attach
with #10–24 × ¾" Flat Head
Screw (D)
Place Mousing Surface on
Keyboard Platform
Remove protective film from
bottom of mouse pad and place on
mousing surface.
1
2
3
4
Verify that you have all the hardware needed for the assembly.
Phillips-head screwdriver
ü
1
2
3
A
C
D
B
Above arm &
worksurface
Under
Platform