Workrite Astra - Manual

Workrite Ergonomics | 800.959.9675 www.workriteergo.com # 1500173 Rev A
Astra User Instructions
Occupancy Sensor instructions
Rotate Occupancy Sensor so that lensed portion faces towards you. To use the Occupancy Sensor, you
must first turn the Astra on. When light is turned on, the Occupancy Sensor will automatically turn off
the light if it detects no movement for 15 minutes. When the sensor detects motion, it will turn the
light on to its last setting.
To manually turn off the light, press the On/Off button. To turn the light back on you must use the
On/Off button again. Once on, the Occupancy Sensor will then be in effect.
On/Off
Dim
On/Off and Dimming
To dim the Astra, hold down the Dim button until
the desired light level is achieved. Once it dims
past the lowest level the light will turn off.
When dimmed, to return to full power, press the
On/Off button once.
For use with Occupancy Sensor, see below.
Notes
If attaching light to adjustable height worksurface, raise worksurface to maximum height before
positioning fixture to ensure that cord will reach the outlet when worksurface is raised.
If the light turns off unexpectedly and will not turn back on, locate connectors in power cord. Pull apart
and reconnect. Check to be sure transformer is completely plugged in to the electric outlet.
Occupancy Sensor
Occupancy Sensor