Workrite Pinnacle 2 - Manual

Pinnacle 2™ Adjustability
Raising the platform
Lift the front edge of the platform and raise it to the desired height. Lower the front
edge to lock the platform in position.
Lowering the platform
Lift the front edge of the platform and press down on the back edge of the platform.
Lower to desired position and release.
Adjusting platform tilt
To position the platform so that it is sloping down towards your desk (negative tilt),
turn the Tilt Knob clockwise. To make the platform slope downwards towards your
lap (positive tilt) turn the knob counterclockwise. The exact tilt position is indicated
by the gauge on the arm cover. A tilt of 6° negative is often recommended as the
optimal ergonomic position.
Rotation
Hold platform at both ends and rotate right or left.
Storage
Lower the keyboard below the Slide Track. Push the platform in to store under the
worksurface.
WorkRite Ergonomics
1450 Technology Lane
Petaluma, CA 94954
www.workriteergo.com - 800.959.9675
©2006