Workrite Cascade Assembly Instructions for 2-Leg Counterbalance Workcenters - Manual (Page 8)

8 of 8 Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Workrite Cascade Workcenter - Assembly Instructions
Adjust Feet Guides
If necessary, adjust leveling guides on table feet to level the worksurface. Unscrew to increase
height, screw in to decrease height.
10
Cleaning instructions
To clean the Cascade Counterbalance Base, apply non-abrasive cleaner to a soft cloth then gently
wipe the worksurface or outside of the legs and feet.
Suggested cleaners: Windex or Formula 409.
Do not use solvents and do not saturate or spray cleaners directly to base.
Do not use grease or clean the counterbalance mechanism with solvents. Never use silicone
products on the legs, as this may cause squeaking.
Adjusting the Counterbalance Mechanism
Depending on the size of your workcenter and the items you
place on it, you may require an adjustment to the counterbalance
mechanism to find a setting that will adjust your worksurface
with minimal human force required.
Load all work item onto the worksurface to
have the approximate working weight on the
table.
Carefully test the counterbalance. With the
work items on the worksurface, you will
probably need to adjust the tension.
Locate the counterbalance adjustment port on
the right side of the Base Assembly.
Using a ⅜" ratchet, crank the counterbalance
adjustment clockwise to ADD tension
to counterbalance MORE weight, or
counterclockwise to counterbalance LESS
weight.
Note: It will take 10 to 20 full revolutions to
make a noticeable change in adjustment.
Proper adjustment results in equal user force
to raise or lower the table.
9
a a
b
b
c
c
d
d