Workrite Cascade Assembly Instructions for 2-Leg Counterbalance Workcenters - Manual (Page 7)

Workrite Ergonomics | 800.959.9675 www.workriteergo.com 7 of 8
Workrite Cascade Workcenter - Assembly Instructions
Operate the Counterbalance with the Manual Release
Grasp the edge of the worksurface then carefully pull the Manual Release. With the Manual Release
trigger pulled, pull up or push down on the worksurface to raise or lower your worksurface. The
table should raise and lower easily. You may want to get used to how the counterbalance performs,
then add your desktop items. The table should not “drop” when the Manual Release is triggered.
The added weight of your desktop items may require an adjustment to the counterbalance
mechanism.
Flip Table over then remove Safety Pin
Carefully flip the Workcenter
onto its feet.
It is VERY important that
the workcenter is on its
feet prior to performing
the next step!
Put a slight bit of pressure
on the worksurface.
Remove the safety pins
on both legs to unlock the
counterbalance mechanism.
Remove the safety tag from
the Manual Release.
7
8
a
a
b
c
d
d
c
b
OK!