Workrite Cascade Assembly Instructions for 2-Leg Counterbalance Workcenters - Manual (Page 2)

2 of 8 Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Workrite Cascade Workcenter - Assembly Instructions
List of Parts, grouped by carton
A
Worksurface (size and shape differ)
Qty: 1
I
Cable Loops
Qty: 1
B
Cascade Base Assembly
Qty: 1
C
Cascade Feet
Qty: 2
D
Cascade Bracket
Qty: 2
F
#M8 × 14 mm Socket
Head Machine Screw
Qty: 12
E
#M4 × 10 mm Sheet Metal
Screw
Qty: 8
G
#12 × ¾" Pan Head
Laminate Top Screw
Qty: 12
H
#8 × ⅝" Pan Head Screw
Qty: 6
Safety
Pin
CAUTION! Do not remove the Safety Tags until
instructed to do so! DO NOT activate the Manual
Release or remove the Safety Pins before the table is
fully assembled! Serious injury or damage can occur.
!
Manual
Release
DO NOT REMOVE Safety Tags until instructed to do so!
Attention Safety Risk!
Manual release may only be pressed if table is in
normal usage condition or the columns are moved
out completely.
Attention Safety Risk!
The safety lock pin may be
removed only if the table is
installed completely and
stands on the ground.