Wine Guardian Ducted Split Wine Cellar Cooling Systems (WGS175) - Manual - Manual (Page 75)

76
!1 出现该警报时，系统将自动关
闭。
Press the “Up” or “Down” arrow once to change
screen from alarm to normal Temperature and
Humidity indication.
THIS ALARM FORCES THE SYSTEM TO
SHUT DOWN. “!1” will remain on screen until the
High Pressure reset switch has been reset. See the
trouble shooting guide page 47 for “Instructions to
Reset High Pressure Switch”
按 “向上”或“向下”箭头更改屏幕上的
从报警到正常温度和湿度指示。警报
号 “！1” 信息将在屏幕上保留，直到
用户重置高压复位开关为止。请见第
74 页的“重置高压开关”部分。
!2 冷凝水开关故障
!2 = CS (Condensate
Switch Fault)
Press the “Up” or “Down” arrow once to change
screen from alarm to normal Temperature and
Humidity indication.
THIS ALARM FORCES THE SYSTEM TO
SHUT DOWN. The “!2” will remain on screen until
the CS (condensate switch) fault is resolved and
reset.
See the trouble shooting guide (page –TBD) for
“Instructions to reset condensate switch”
按 “向上”或“向下”箭头更改屏幕上的
从报警到正常温度和湿度指示。
此报警强制系统关闭。
“! 2” “报警”
将持续在 屏幕上，直到用户重置冷
凝水复位开关和冷凝水问题解决为
止。
Open Fault
!1 高压故障
!1= High pressure
switch fault