Wine Guardian Ducted Split Wine Cellar Cooling Systems (WGS175) - Manual - Manual (Page 62)

63
3. Drill two (2) .32cm holes and insert anchors
(provided) within the mounting surface. Anchors may
not be required if securing to a wall stud or racking
system. 钻两个（2）0.32 厘米的洞，并在安装表面插
入钉锚（提供件）。如果控制器背板安装在木制的墙
或框货架系统，钉锚可能不需要。
4. Plug in the communication cable to the back of the
Remote Interface Controller backing plate. (Fig.4)
将 通
信电缆插入遥控控制器接口板背面的插头。 （图
a) Attach backing plate to wall using the two
screws provided with the system. (Fig.5) )
用 提供的两
个螺丝将接口板背面垫板装到墙上。 （图
5. Re-install plastic face plate on to backing plate. 将正
面的盖板盖好。
6. Re-attach the communication cable to the side of the
Wine Guardian cooling unit. (Fig.6) 将通信电缆插回酒
卫主机的侧面（图
Fig. 4
Fig. 6
Fig. 5