Wine Guardian Ducted Split Wine Cellar Cooling Systems (WGS175) - Manual - Manual (Page 69)

70
Settings – Press and hold the “Settings” button for five (5) seconds to access the
following settings. 设置 - 按住 “模式”按钮五（5）秒钟进入以下设置。
Deg F or Deg C 华氏度或摄氏
度
Setting 1 设置 1
 Press the “Down” arrow to change
temperature from Deg F to Deg C.
Press the “Up” arrow to change
temperature from Deg C to Deg F.
按
“向下”箭头改变温度从华氏度
到或摄氏度。.按“向上”箭头更改
摄氏度的温度到华氏度。
Low temperature alarm set
point 低温报警设定点
Setting 2 设置 2
 Press “Settings” button to advance
to Setting 2. Press the “Up” or
“Down” arrow buttons to adjust to
the desired set point. Factory
default is 10 Deg. C.
按 “模式”按钮
，直至设定 2。按“向上”或“下移
”箭头按钮来调整所需的设定点。
出厂默认是 10 摄氏度（C）。
High temperature alarm set
point 高温报警设置点
Setting 3 设置 3
 Press “Settings” button to advance
to Setting 3.
按
“模式”按钮，直至设定 3。
 Press the “Up” or “Down” arrow
buttons to adjust to the desired set
point. Factory default is 18 Deg C.
按 “向上”或“下移”箭头按钮，调
整到所需的设定点。出厂默认是
18 摄氏度 （C）。
Low humidity alarm set point
低湿度报警设置点
Setting 4 设置 4
 Press “Settings” button to advance
to Setting 4.
按“模式”按钮，直至设定 4。
 Press the “Up” or “Down” arrow
buttons to adjust to the desired set
point. Factory default is 5%.
按“向上”或“下移”箭头按钮，调整
到所需的设定点。出厂默认为 5％
相对湿度
High humidity alarm set point
高湿度报警设置点
Setting 5 设置 5
 Press “Settings” button to advance
to Setting 5.
按
“模式”按钮，直至设定 5。

Press the up or down arrow buttons
to adjust to the desired set point.
Factory default is 95%.
按向上或向下箭头按钮，调整所需的
设定点。出厂默认为 95％
相对湿度