Welch Allyn Cardio Perfect Workstation (SW 1.6.2) Single CPu Install (Windows Vista) Instructions - Installation Guide - Manual

INSTAllING ThE CArdIoPErfECT
WorkSTATIoN SofTWArE oN A
SINGlE PC
This guide shows how to install the software for the Welch Allyn
CardioPerfect Workstation on a single laptop or desktop PC. This guide
does not cover installation for networked CardioPerfect configurations,
or for EMR-connected computers. For a detailed installation procedure,
see CardioPerfect Workstation Software Installation Manual, located
on the CD under “Browse the manuals” folder.
1 Install the CardioPerfect software and USB drivers.
System requirements
You need the following minimum recommended configuration to
work with the CardioPerfect resting ECG, ambulatory blood pressure,
or spirometry software modules.
Computer
Tower or desktop PC preferred; laptop or
tablet. Some tablet computers may not
support data recording.
operating System Windows Vista Business Edition
service pack 1 or later
CPU P4 (or equivalent) or higher
Hard disk 20 GB with 5 GB free space
RAM 512 MB, 1 GB or higher recommended
Monitor resolution 1024 x 768 true color,
1280 x 1024 recommended
Monitor size 15" or higher
Ports 2 USB
This screen might not appear.
This screen might not appear.
CardioPerfect CD.
For this installation you can ignore all but this first
menu item. If this screen does not appear, explore
the CD, and run installer ( ).
Make sure that you have administrator rights.
Close all running programs.
(next page)
C A R D I O P E R F E C T ™
WorkSTATIoN
INSTA L L ATION GUIDE
Windows Vista ® - DO THIS FIRST