Welch Allyn Elite Stethescope Directions For Use - Installation Guide - Manual

Tycos 5091-62
Rail Mount Kit
for
Classic Wall Aneroid
Installation Instructions
Assemble parts as shown:
1) Hold RAIL MOUNT against WALL BRACKET on side
away from gauge and aligned with bottom holes as
shown.
2) Place one SCREW through gauge WALL BRACKET
from gauge side and turn into threaded hole in WALL
BRACKET. Repeat with second SCREW.
3) Tighten SCREWS into RAIL MOUNT with hex
wrench supplied.
Welch Allyn, Inc. Printed in USA
95P406 Rev. F
Tycos 5091-62
Rail Mount Kit
for
Classic Wall Aneroid
Installation Instructions
Assemble parts as shown:
1) Hold RAIL MOUNT against WALL BRACKET on side
away from gauge and aligned with bottom holes as
shown.
2) Place one SCREW through gauge WALL BRACKET
from gauge side and turn into threaded hole in WALL
BRACKET. Repeat with second SCREW.
3) Tighten SCREWS into RAIL MOUNT with hex
wrench supplied.
Welch Allyn, Inc. Printed in USA
95P406 Rev. F