Welch Allyn Holter Software PCH100 and PCH200 - Installation Guide - Manual (Page 13)

13
3. Installing the USB Bluetooth® Adapter
Note
: For Systems running Windows 7, do not install the Belkin Software. For Windows 7, plug dongle into
USB port and Windows 7 will automatically install the drivers. Start the Welch Allyn Holter System and set the
Bluetooth Stack selection to “Microsoft” under the Welch Allyn Holter System – System Settings.
Overview: The Bluetooth® adapter allows the Welch Allyn Holter Software to communicate with Holter recorders through a wireless
connection.
3.1 Use USB Bluetooth® Adapter Software (Provided on Belkin CD)
Note: DO NOT INSTALL THE BELKIN BLUETOOTH® ADAPTER UNTIL STEP 3.1.6
3.1.1
Insert the Belkin Bluetooth® Technology USB Adapter CD and wait for the software to run automatically.
Click on “Install Software” to start Install Shield Wizard for the WIDCOMM Bluetooth Software.
3.1.2
The “Software InstallShield Wizard for Belkin Bluetooth® Software” window displays.
Click on “Next” to begin the installation process.
3.1.3
The “License Agreement” window displays.
Choose “I accept the terms in the license agreement” to accept the license agreement. Click on “Next” to
continue.