Welch Allyn Mounting Adapter for 1500 Patient Monitor - Installation Guide - Manual

Installation Guide
Mounting Adapter for Welch Allyn® 1500 Patient Monitor
The purpose of this installation guide is to describe attachment of the Mounting Adapter to the Welch Allyn 1500 patient
Monitor:
Parts Reference
The following parts are provided for this procedure (hardware not shown):
Item # Description Qty
1 Mounting Adapter 1
2 M4 x 8mm Pan Head Machine Screw (PHMS) 4
Tools Required: Phillips screwdriver (not provided).
Attaching Mounting Adapter to Monitor
Installation Note: When Installing Mounting Adapter, Guide Slot must be positioned down.
1. Using a Phillips screwdriver, fasten Mounting Adapter to the four (4) threaded
mounting holes on the back of the Monitor with four (4) M4 x 8mm PHMS (below left).
M4 x 8mm PHMS (4)
Guide Slot
Threaded Mounting
Holes (4)
Mounting Adapter
DU-WA-0014-16 Rev A 4/22/10 GCX Corp. Page 1 of 2