Welch Allyn CP50 - Quick Reference Guide User Manual
Welch Allyn Equipment
CP 50™ and CP 50 Plus™ 12-lead resting
electrocardiograph
Quick reference guide
Powering the electrocardiograph
The electrocardiograph runs on AC or battery power. Plug the electrocardiograph into AC
power as often as possible so that the built-in charger can keep the battery charged.
Regardless of the battery condition, you can use the electrocardiograph whenever it is
plugged in.
WARNING When you use AC power, always plug the electrocardiograph
into a hospital-grade outlet to avoid the risk of shock.
WARNING If the integrity of the building’s safety ground is in doubt,
operate this device on battery power to avoid the risk of shock.
To power up or power down
Press
.
1
Table of contents
Document Outline
- Contents
- CP 50™ and CP 50 Plus™ 12-lead resting electrocardiograph
- Troubleshooting
- Lead-quality problems
- System problems
- The electrocardiograph won't turn on when it is plugged in
- The electrocardiograph won't turn on when it is unplugged
- The electrocardiograph shuts down during printing
- The electrocardiograph prints fewer than 10 reports on a full battery charge
- The electrocardiograph does not respond when you press buttons or touch the screen