Welch Allyn ABCs of the Welch Allyn 1500 Patient Monitor - Quick Reference Guide - Manual (Page 2)

1500 Monitor FAQ 2
MC8193 09/2011
E
End
Monitoring
Power Down: To turn the monitor off, press the On/Off button for approximately four seconds. A “Monitoring is shutting down, Pleas Wait”
message will appear
Standby: When the Standby button is pressed, a black screen with “Standby Mode Press any key to resume monitoring” is displayed.
 In standby mode, vital signs data and alarms are no longer displayed or collected.
 When monitoring is resumed, user is prompted to confirm the same patient. If no is selected, patient data is
deleted.