Welch Allyn Connex Vital Signs Monitor 6000 Series with ConnexVM - Push Data from Device Workflow - Quick Reference Guide - Manual

C
onnex
V
ital
S
ignS
M
onitor
6000 S
erieS with
C
onnex
®VM
Q
uiCk
r
eferenCe
C
ard
-
P
uSh
d
ata froM
d
eViCe
w
orkflow
To Capture Vitals:
• Turn on the CVSM 6000 Series device.
• Touch the clinician area. Scan the Clinician’s ID.
Touch Select.
• From Home screen, scan the patient’s barcode, OR
touch Patients, List and then the patient. Touch Select.
• Capture the vital signs.
NOTE: if available, SpHb numeric value will automatically
transfer in.
NOTE: For Spot Check profile: Remove the SpO2 sensor
to save the reading. For Monitoring profile: Keep the SpO2
sensor on to save the reading.
• Touch HEIGHT, WEIGHT, PAIN or RR (respiratory rate)
to enter values. Touch OK when done.
• To enter BP site, cuff size, patient position, Sp02
method, concentration or flow rate, touch Patients tab
and then Modifiers.
• When readings are complete, touch Save.
Clinician area
To Push Data from Device:
• Attach the device to a PC with a USB cable.
• Touch the REVIEW tab.
• Touch readings you want to send (a √ will appear next
to selected items). Touch Send. Touch OK to confirm.
NOTE: Depending upon configuration, once you touch
Send, data is sent to Connex®VM and the memory on the
device is Cleared .
1-800-289-2501 ©2010, Welch Allyn, Inc. All rights reserved. 03/2011 MC7600