Welch Allyn Connex Vital Signs Monitor Base Set - Quick Reference Guide - Manual (Page 3)

Manage patient records (Intervals Monitoring,
Spot Check, and Triage profiles)
Patient records can be sent to the network, printed, or deleted.
1. Touch the Review tab.
2. Select records by touching the check box.
3. Touch
Send to transmit the records to the network, Print to print the records,
or Delete to permanently remove the records.
Note The icon indicates the records have been sent to and received by
the network.
Note Measurements that triggered a physiological alarm are highlighted on
this tab.
Navigating the Review tab
(Continuous Monitoring profile)
In the Continuous Monitoring profile, the Review tab enables access to a trend table
of all readings for the currently monitored patient.
1. Touch the Review tab.
Note Measurements that triggered a physiological alarm are highlighted
on this tab.
2. Touch the View list box to modify the trend interval.
The default trend interval is 1 minute.
3. Use the scroll bar on the right as well as the page forward and page backward
controls in the table header to view additional measurements for your patient.
The most recent measurements appear on the right side of the table, with older
measurements to the left.
Note Episodic measurements that occur between trend interval measurements
are displayed in separate columns under their own time stamp.
4. To print the patient record, modify the View selection as desired and touch Print.
5. In the Print options dialog, select the desired Timespan and touch Print.