Welch Allyn Acuity Update For Software Version 5.01 - Quick Reference Guide - Manual (Page 2)

Cordless I and QuikSigns Monitors
Unsupported
Acuity ® software version 5.01 does not support the Propaq Cordless ® I and Quiksigns ®
monitors.
New Patient ID Setup Window
In Acuity 5.01, the Patient ID Setup window shows the model and serial number of the
monitor.
The Patient ID Setup Window
Room Assignments for Wireless Patients
If you attempt to assign a patient on a wireless monitor to a location already assigned
to another wireless patient, Acuity will refuse the assignment and put both patients in
the general pool of wireless patients. Reassigning either patient to a new location will
allow the other patient to be shown in the first location.
Setting Alarms for Micropaq Patients
If the Micropaq monitor is in telemetry dropout, do not alter settings in the Alarm,
Arrhythmia, or ST Setup windows. Any changes made to the settings during dropout
will not be retained.
Except for patients
monitored by Telemetry
monitors and
Modem-Propaq, Acuity
automatically enters the
patient’s room number.
The monitor model and
serial number are shown
here.
This information is
grayed-out except for
Cordless Telemetry
patients.
Welch Allyn Protocol, Inc.
Customer Service
8500 SW Creekside Place
Beaverton, Oregon 97008-7107 USA
Within USA, toll free:
Phone: (800) 289-2500
Phone Technical Services: (800) 289-2501
WorldWide: Phone: (503) 526-8500
Fax: (503) 526-4200
Fax Technical Services: (503) 526-4910
Internet: http://www.protocol.com
Email Technical
Services: [email protected]
Email Marketing Dept.: [email protected]
Protocol Medical Systems, Ltd.: NW Europe
Derby Service Centre, St. Georges House, Vernon
Gate
Derby DE1 1UQ, United Kingdom
Phone: 44 1332 206208
Fax: 44 1332 206209
Email: [email protected]
Welch Allyn U.K. Ltd.
Cublington Road, Aston Abbotts
Buckinhamshire HP22 4ND, England
Phone: 44-1296-682140
Fax: 44-1296-682104
Welch Allyn Italia Srl
Via Napo Torriani, 28, 20124 Milano, Italy
Phone: 39-02-6699-291
Fax: 39-02-6671-3599
Welch Allyn GmbH Germany
Postfach 31, Zollerstrasse 2-4
72471 Jungingen, Germany
Phone: 49-7477-92-710
Fax: 49-7477-92-7190
Welch Allyn France
814 Rue Charles de Gaulle
77100 Mareuil les Meaux, France
Phone: 01-6009-3366
Fax: 01-6009-6797
Welch Allyn – South Asia and Pacific
P.O. Box 39-293 Howick, Auckland, New Zealand
Phone: 64-9-532-9524
Fax: 64-9-532-9526
Welch Allyn Hong Kong
Room 601, Kornhill Metro Tower
1 Kornhill Road, Quarry Bay, H.K.
Phone: 852-2886-8980
Fax: 852-2886-8360
Welch Allyn Protocol, Inc. – Latin America
MD Intl., 7324 SW 48th Street, Miami, FL
33155 USA
Phone: (305) 669-9003
Fax: (305) 669-8951
Update Part Number 810-1351-00 Rev A, 7/01
Printed in USA
0123
Copyright © 2001 by Welch Allyn Protocol, Inc. Welch Allyn ® is a registered trademark of Welch Allyn,
Inc. Protocol ® , Acuity ® and Flexible Monitoring ® , Propaq ® , Propaq Encore ® , Propaq CS ® , and
Modem-Propaq ® are registered trademarks of Welch Allyn Protocol, Inc. Micropaq™ is a trademark of
Welch Allyn Protocol, Inc. Welch Allyn Protocol, Inc. is protected under various patents and patents
pending.
Copyright Notice: Software in this Product is Copyright© 2001 by Welch Allyn Protocol, Inc., or its
vendors. All rights are reserved. The software is protected by United States of America copyright laws
and international treaty provisions applicable all over the world. Under such laws, you are licensed to use
the copy of the software incorporated with this instrument as intended in the operation of the product in
which it is embedded, but the software may not be copied, decompiled, reverse-engineered,
disassembled or otherwise reduced to human-perceivable form. This is not a sale of the software or any
copy of the software; all right, title and ownership of the software remains with Welch Allyn Protocol or its
vendors. Welch Allyn Protocol will make available specifications necessary for interoperability of this
software on request; however, users should be aware that use of Welch Allyn Protocol hardware and
software with devices or software not sold by Welch Allyn Protocol or its authorized dealers and affiliates
may lead to erroneous results and consequent danger in patient care, and may also void Welch Allyn
Protocol's warranty.
Disclaimers: Welch Allyn Protocol, Inc. cautions the reader of this manual:
• This manual may be wholly or partially subject to change without notice.
• All rights are reserved. No one is permitted to reproduce or duplicate, in any form, the whole or part of
this manual without permission from Welch Allyn Protocol, Inc.
• Welch Allyn Protocol, Inc. will not be responsible for any injury to the user or other person(s) that may
result from accidents during operation of the Propaq monitor.
• Welch Allyn Protocol, Inc. assumes no responsibility for usage not in accordance with this manual that
results in illegal or improper use of the Propaq monitor.
• No implied license: Possession or purchase of this device does not convey any express or implied
license to use the device with unauthorized sensors or cables which would, alone, or in combination
with this device, fall within the scope of one or more of the patents relating to this device.