Canon DC301 - Manual (Page 33)

Video • 33
Deleting Scenes
If you are using a DVD-RW disc, you can
delete those scenes that you are not
interested in keeping.
Deleting a Single Scene
POINTS TO CHECK
Disc type: DVD-RW • VR mode
From the original index screen, select
(
, ) the scene to delete. To
delete a scene only in the playlist,
switch to the playlist first (
43), and
then select the scene.
[ DELETE] [YES]
Deleting All Scenes
POINTS TO CHECK
Disc type: DVD-RW • VR mode
To delete all the scenes from the original
index screen, perform the following
procedure. This will delete also the
whole playlist. If you want to delete only
the playlist (without affecting the original
recordings), switch to the playlist first
(
43), and then continue as follows.
[ MENU]
[ DISC OPERATIONS]
[DEL.ALL MOVIES]* [YES]
* When you are deleting the playlist, this
menu option will be replaced by
[DEL.PLAYLIST].
IMPORTANT
Be careful when deleting original
recordings. Once deleted, an original
scene cannot be recovered.
NOTES
• You may not be able to delete scenes
shorter than 5 seconds. To delete such
scenes you must initialize the disc
(
44), in the process deleting all the
recordings on the disc.
• Do not change the position of the
switch or the / switch while the
scene is being deleted (while the DISC
access indicator is on or flashing).
On-Screen Displays (Data Code)
The camcorder keeps a data code
containing the date and time and other
camera data (shutter speed, aperture,
etc.) registered at the time of recording.
You can select the data to be displayed.
For details about on-screen displays for
still images, refer to
Histogram and
Other Screen Displays ( 55) .
( 18)
FUNC.
( 20)
( 18)
FUNC.
FUNC.
( 20)
FUNC.
FUNC.
D126_NTSC_PAL_E.book Page 33 Tuesday, January 15, 2008 12:15 PM