Maintenance/others – Canon DC301 User Manual
Page 76
76 •
Additional Information
Storage
If you do not intend to use the
camcorder for a long time, store it in a
place free of dust, in low humidity, and
at temperatures not higher than 30 °C.
Cleaning
Camcorder Body
• Use a soft, dry cloth to clean the
camcorder body. Never use
chemically treated cloths or volatile
solvents such as paint thinner.
Pick Up Lens
• Remove any dust or dirt particles
using a non-aerosol type blower
brush. Never touch the pick up lens
directly to clean it.
Lens and Viewfinder
• If the lens surface is dirty, the
autofocus may not work properly.
• Remove any dust or dirt particles
using a non-aerosol type blower
brush.
• Use a clean, soft lens-cleaning cloth
to gently wipe the lens or viewfinder.
Never use tissue paper.
LCD Screen
• Clean the LCD screen using a clean,
soft lens-cleaning cloth.
• Condensation may form on the
surface of the screen when the
temperature changes suddenly. Wipe
it with a soft dry cloth.
Condensation
Moving the camcorder rapidly between
hot and cold temperatures may cause
condensation (water droplets) to form
on its internal surfaces. Stop using the
camcorder if condensation is detected.
Continued use may damage the
camcorder.
Condensation may form in the following
cases:
• When the camcorder is moved from
an air-conditioned room to a warm,
humid place
• When the camcorder is moved from a
cold place to a warm room
• When the camcorder is left in a humid
room
• When a cold room is heated rapidly
• Do not expose the camcorder to
sudden or extreme changes in
temperature.
• Unload the disc, place the camcorder
in an airtight plastic bag and let it
adjust to temperature changes slowly
before removing it from the bag.
• If a disc is loaded, remove the disc
immediately and leave the disc cover
open. Leaving the disc in the
camcorder may damage it.
• A disc cannot be loaded when
condensation is detected.
Maintenance/Others
T
O
AVOID
CONDENSATION
W
HEN
CONDENSATION
IS
DETECTED
D126_NTSC_PAL_E.book Page 76 Tuesday, January 15, 2008 12:15 PM