Welch Allyn Connex Vital Signs Monitor - Quick Reference Guide - Manual (Page 2)

Required Miscellaneous Off-the-Shelf Tools
The following tools are not available from Welch Allyn, but will be used in service and maintenance activities.
Description
Quantity
Required
COMPUTER RUNNING WINDOWS XP, SP3 or Windows 7 1
USB CABLE: TYPE A to TYPE B (Minimum 3’ length) 1
SPLINTER TWEEZER 3.5 INCH 1
NEEDLE NOSE PLIERS 6" 1
NETGEAR Router, A/B/G or Equivalent 1
PHILLIPS #2 1
PHILLIPS #1 1
10MM HEX BIT 1
TIE WRAP CUTTER 1
SCISSORS 1
TORX DRIVER 1
#10 TORX BIT 1
Tie WRAP Gun 2
SLOTTED SCREW DRIVER 1
Contact your Welch Allyn representative for more information regarding the toolset required for your configuration.
For more information on Welch Allyn Technical Service Training, visit www.welchallyn.com/service
*The listed tools meet the performance requirements necessary to perform service and maintenance, as described in the Welch Allyn
Connex® Vital Signs Monitor 6000 Series™ Service Manual. For complete details on test procedures and parameters, please review the
service manual.
**Customers may be able to perform basic functional verification checks using their own test equipment. Please consult a Welch Allyn
Technical Representative to confirm whether your equipment meets the performance specifications required to complete these checks.
++ Needed to conduct a Full Calibration even if your device is not using Nurse Call.