Welch Allyn Solarc Light - User Manual - Manual (Page 13)

13
LAMP P/N M21P011 M21P021
Output Performance
Output (CBCP) 14,500 5,000
Beam Divergence (@ 50% Intensity) 12 20
Application Information
Color Temperature (˚K) 6,000 6,000
Chromaticity (x,y) 0.32, 0.32 0.32, 0.32
Median Life (Hours) 750 750
Warm-up Time To 90% Output (Seconds) 20 20
Restart Time To 90% Output (Seconds) 25 25
Ballast B22R001
Input Voltage 9.8 V–15 V 9.8 V–15 V
Current @ 12 VDC 2.3 A 2.3 A
Lamp Connector C18A003
Figure 6: Parabolic Reflectorized Lamps Typical Performance Specifications
Duty cycle for Rated Median Lamp Life: 21 W—1 hr on / 15 min off. 50 W—2 hr on / 15 min off
ELECTRICAL B19R001 B22R001 B25R001
Input Power Specifications, unless otherwise indicated, are nominal at or near 25˚C.
Turn-on Voltage 1 9.8 VDC
Turn-off Voltage 1 9.2 VDC
Maximum Voltage 16.0 VDC
Steady State Current 2 2.0 A 2.3 A 2.6 A
ENVIRONMENTAL
Operating Temperature
0˚ to +70˚C
(forced convection cooling recommended)
Storage Temperature -40 to +105˚C
PINOUTS CONNECTOR
Input Power J101 41671 or
(Molex 41791 series) 26-48-1025
Pin 1 = “+” input power
Pin 2 = “-” input power
Output Power
P1
P2 Anode, white wire on ballast connector
Cathode, black wire on ballast connector
Figure 7: 19, 22 & 25 Watt Ballasts Performance Specifications
1 Turn-on and turn-off specifications are a function of input wiring resistance. The voltage at the pins of J101 are regulated using
the remote sense leads of a power supply.
2 Steady state current flow after lamp warm-up @ 12 V.