Welch Allyn Klean Air II - User Manual - Manual (Page 4)

Page 4 990070 Rev. C
Specifications
•
Power Requirements: 100-127 volt,
~
, 60 Hz., 1.75A
220-240 volt,
~
, 50 Hz., 650 mA
IEC 320 socket with removable cord is located at back; verify unit has correct
voltage before use
•
Air Flow: 80 cfm (low) or 120 cfm (high)
(2.26 or 3.39 m
3
/min)
•
Approximate Size: 13” x 13” x 27” (33 x 33 x 68.6 cm)
•
Approximate Weight: 45 lbs. (20.4 kg)
•
Control Panel: located on door of instrument for easy viewing
•
Filters: HEPA DOP 99.97% / 99.99% and activated carbon
pre-filter
•
Filter Replacement: user access through door
•
Hose: 3” dia. (7.6 cm), 3’ (91 cm). length with expanded
intake
•
Power Switch: located adjacent to power inlet
•
Environment Limitations: Operational Requirements:
Temperature: 50
°
to 95
°
F (+10
°
to 35
°
C)
Humidity: 30 % to 75 %
Pressure range: 10.15 to15.37 psia (70 to 106 kPa)
Transport and Storage Requirements:
Temperature: 14
°
to 122
°
F (-10
°
to 50
°
C)
Humidity: 10 % to 90 %
Pressure range: 7.25 to 15.37 psia (50 to 106 kPa)
•
Equipment Classification: the Kreativ Model Klean Air II system is an EC
Class I device requiring an electrical earth ground.
This device is classified as ordinary with regard
to protection against water ingress.
•
Electrical Fuses: Littelfuse, SlowBlow
Model Fuse Mfr. Mfr. P/N Kreativ P/N Fuse Rating
Klean Air II
Domestic Littelfuse Type 218-02.5 600109 2.5A, 250Vac
Klean Air II
European Littelfuse Type 218-01.6 600096 1.6A, 250Vac