Welch Allyn 9600 Plus Calibration Tester - User Manual - Manual (Page 34)

28 Chapter 5 Warranty and Service Welch Allyn 9600 Plus Calibration Tester
Service
Before returning a product for repair or annual calibration you
must obtain authorization from Welch Allyn. An RMA (Return
Merchandise Authorization) number is given to you from our
service personnel. Be sure to note this number on the outside of
your shipping box. Returns without an RMA number will not be
accepted for delivery. Please contact your customer service
representative at the appropriate Welch Allyn service center
listed below for further information.
All equipment used in calibrating the 9600 Plus Calibration Tester
is traceable to NIST.
Welch Allyn assumes no responsibility if the 9600 Plus
Calibration Tester is calibrated at an unauthorized service center.
Send the 9600 Plus Calibration Tester to any one of the following
authorized service centers for recalibration.
USA, Central America, and South
America
Welch Allyn, Inc.
4341 State Street Road
Skaneateles Falls, NY 13153-0220
Tel.: 1-800-535-6663
Fax: 1-315-685-3361 Canada
Welch Allyn Canada Limited
Technical Service Centers
160 Matheson Blvd., East
Mississauga, Ontario
CANADA L4Z 1V4
Tel: 905-890-0004 or 800-561-8797
Fax: 905-890-0008