Welch Allyn KleenSpec 790 Series Cordless Illumination System - User Manual - Manual (Page 19)

Directions for use Cordless illumination system 15
Appendix
Specifications
Item Specification
Auxiliary power cord transformer
Classification
Input
Output
Category
U.S. & Canada
Class II and internally
powered, type BF applied
part
120 V ~ 60 Hz
5.5 VDC, 300 mA
Not AP/APG equipment International
Class I and internally
powered, type BF applied
part
100 - 240 VAC 200-100 mA
5.5 VDC, 300 mA
Not AP/APG equipment
Charging station transformer
Classification
Input
Output
Category
U.S. & Canada
Class I and internally
powered
120 V ~ 60 Hz
9.8 VDC, 150 mA
Not AP/APG equipment
International
Class I, Class II and internally
powered
230 V (240 V in Australia) ~
50 Hz
7.5 – 9.2 VDC , 200 mA
Not AP/APG equipment
Power cord length
Auxiliary power cord
Charging station 305 cm (120 in)
92 cm (36 in)
Weight
Illuminator
Charging station
(base and power cord)
Auxiliary power cord 48 g (0.1 lb)
142 g (0.31 lb)
290 g (0.64 lb)
Battery cell
Capacity
Voltage
Chemistry 420 mAh
3.7 V
Li-ion (single lithium ion)
Protection against ingress of
water, per IEC 60529 (illuminator,
auxiliary power cord, charging
station) IPXØ
Operating conditions
Temperature
Relative humidity
Altitude +10° C to +35° C (+50° F to +95° F)
30% to 75% noncondensing
700 to 1060 hPa