Vetter Struts and Accessories - Manual (Page 7)

Page 7/24
Corrective plate ART-SL 23, 23°
Pressure piece/
mandrel
ART-RH
Plate, ribbed ART-RB
Attachments are placed onto the piston rod of the ART strut and are fixed and their direction locked with the aid
of the spring-loaded lock. The direction of the attachment, such as the V-attachment or angle attachment, must
be taken into consideration.
1.5.2 Angle Pieces
Angle pieces are required for connecting the base plates with the ART struts. Because of the different versions
available, the ART strut can be inserted into the relevant foot plate structurally on one side as well as on both
sides in an angled position.
When using the ART struts in the angled position it is imperative that a safety
device is used to prevent catapulting outwards! This can be in the form of square
timber and corresponding ground or, depending on the foundation, with screws
or bolts on the base plate.
Angle bracket ART-PC
45° clevis, single
sided
ART-45SC
Static clevis ART-SC
45° clevis ART-C45
60° clevis ART-C60
These clevises are positioned on the base plate with their function side and secured with the safety pin to the
base place.