Citizen Systems iDP-3535 - Manual (Page 31)

iDP-3535 User’s Manual
CITIZEN 31/38
8. Print Control Functions
8-1 SI & SO Code
Symbol Code (Hex.) 8 bit data 7 bit data
SI 0F Standard character Designation of SI side
designation (Same as US) character
SO 0E Double-width character Designation of SO side
designation (Same as RS) character
8-2 Function Code
Symbol Code (Hex.) Function
LF 0A Feeds a new line after printing.
Feeds a new line after printing. You can select CR function
CR 0D in accordance with your computer's output. For details,
refer to 7. Function select by Dip-switches.
RS 1E Enhanced character designation. The designation is
released with US code or line feed.
US 1F Standard character designation.
FF 0C Carries out from feed performance after printing.
DC 1 11 Makes the printer SELECT (ON LINE) state.
Only this code can be accepted irrespective of
DESELECT (OFF LINE) state.
DC 2 12 Red printing is specified / released. Designation / release
(alternative) of red one line printing is possible with
this code.
DC 3 13 Makes the printer DESELECT (OFF LINE) state.
CAN 18 Clears the print data in the buffer. All the previous input
data is cleared with this code.
ESC + "C" 1B, 43 Page length designation and paging action. Ref.to 8-3 (4).
ESC + "0" 1B, 4F Paging is off.
BEL 7 Control command for cash drawer 1 Ref.to 8-3 (7).
SUB 1A Control command for cash drawer 2 Ref.to 8-3 (8).