Universal Remote Control (URS) SL-8000 - Manual (Page 23)

4 Press either the SAT Device Button to set-up for SAT
Channel Control or the CBL Device Button to set-up for
Cable Channel Control. Either SAT or CBL will flash
in the LCD, depending on the Device Button selected.
SAT or Cable Channel Controls will now override the
original CHANNEL UP and DOWN in this mode.
To Return to the Original Setting:
1
Select the mode that you want to turn off the Channel
Control “Punch Through.”
2 Press the corresponding Device Button and the MUTE
button, simultaneously. SET will appear in the LCD.
3 Press the VOLUME DOWN button. PUNCH will appear
in the LCD.
4 Press the same Device Button again. The DEVICE Mode
will flash in the LCD.
The SAT or Cable Channel Control “Punch Through” is
now turned off. The CHANNEL UP and DOWN of the
original device will now operate on the remote control.
19 19
Advanced Features