Universal Remote Control (URS) SL-8000 - Manual (Page 19)

After you set-up the remote control to operate your
equipment, you can also program advanced features on
the remote control. The advanced features are designed
to enhance the use of the remote control with your home
entertainment system.
A: Punch Throughs
Volume Control “Punch Through”
You can program the remote control so that either the
AUDIO or TV Volume Control (VOLUME UP, DOWN AND
MUTE) will also operate in other modes on the remote control.
Note: When this feature is active, the AUDIO or TV VOLUME
and MUTE will override any existing volume controls in that
mode.
To Set-Up:
1
Select the mode that you wish to program for Volume
Control “Punch Through.”
2 Press the corresponding Device Button and the MUTE
button simultaneously. SET will appear in the LCD.
3 Press the VOLUME UP button. PUNCH will appear
in the LCD.
4 Press either the AUDIO Device Button to set-up for Audio
Volume Control or the TV Device Button to set-up for TV
Volume Control. AUDIO or TV will flash in the LCD,
depending on which Device Button was selected.
AUDIO or TV Volume Control will now override the
original VOLUME and MUTE in this mode.
17 17
Example: Raise, lower and mute the VOLUME of your
Audio receiver while the remote control is in the Satellite
mode.
Advanced Features